Instructional Video

Comic Box Assembly Instructions

  • How to build the Little Star Storage Comic Box. For a Video Guide, click here: Video Guide

    1. Assemble the Box Body

    Step 1: Form the Box Shape

    • Unfold the flat sheet until it forms a rectangular box shape.
    • You should see:
    • 4 flaps at the top
    • 2 sets of flaps at the bottom

    Step 2: Secure the Bottom

    1. Turn the box upside down.
    2. Fold the smallest bottom flap inward first.
    3. Push the second flap tightly against it.
    4. Hold both flaps firmly so they do not move.
    5. Carefully flip the box right-side up.
    6. Pull the side flaps upward until they align with the pre-made holes.

    Step 3: Lock the Walls

    1. Find the short flaps at the top of the box.
    2. Bend them downward until they sit against the sides.
    3. Take one long side flap:
    • Bend the end inward.
    • Push it firmly downward toward the bottom of the box.
    1. The fit will be tight — this is intentional to maximize durability.
    2. Repeat on the opposite side.

    Finished

    Your box body is now fully assembled.

  • 2. Assemble the Lid

    The lid uses interlocking corners for extra strength and stable stacking.

    Step 1: Shape the Lid

    1. Hold the lid by the two long sides.
    2. Bend both long sides inward along the pre-bent fold lines.

    Step 2: Fold the Corner Tabs

    1. Locate the two small cardboard tabs (“outshoots”).
    2. Fold both tabs inward.
    3. Fold the short side upward and over the tabs.
    4. A small piece of cardboard should now sit flush with the lid.

    Step 3: Lock the Sides

    1. While holding the tabs down, fold one long side downward.
    2. This locks the two sides into place.
    3. Repeat on the opposite long side.

    Step 4: Final Check

    • Repeat the folding process on the final side.
    • Make sure all edges are secure, flat, and properly locked together.

    Finished

    Your lid is now fully assembled.